Troubleshooting and FAQs B-2
Problems with
Sound
There is unexpected excessive environmental sound or effects when an
audio file is played.
The last selected preset is an inappropriate environment for the current audio file.
To switch to an appropriate environment:
1. Click the
Audio Effects
tab in EAX Console.
2. Click the
Enable/Disable Audio Effects
check box to clear it.
Note:
The preset box title may change, depending on the effect you select.
No sound from the headphones.
Check the following:
❑
The headphones are connected to the Headphones jack.
❑
In the
Speaker Selection
tab of Creative Speaker Settings, the
Headphones
option is selected in the
Speaker/Headphone Selection
box.
❑
In the
Basic
tab of Creative Surround Mixer, the recording source selected is
“What U Hear”
.
Individual analog recording sources are not displayed in Creative Surround
Mixer.
The following analog recording sources are combined in one recording control called
Analog Mix (Line/CD/TAD/Aux/PC)
, which is found in the
Record
panel of the
Basic
tab:
❑
Line-In
❑
CD Audio
❑
Auxiliary
❑
TAD-In
❑
PC Speaker
To Next Page
Loading...
