Creative Sound Blaster Audigy 2 - Page 73

Troubleshooting and FAQs B-16
11.When prompted to restart your computer, click the
Yes
button.
12.Repeat steps 4-11 if you have other drives, for example, other hard disk drives,
CD-ROM, CD-RW, and DVD-ROM drives. In step 4, double-click the respective
drive icon.
For Windows 2000 and Windows XP:
1. Click
Start
->
Settings
->
Control Panel
.
2. In the
Control Panel
dialog box, double-click the
System
icon.
3. In the
System Properties
dialog box, click the
Hardware
tab.
4. Click the
Device Manager
button.
5. Double-click the
ATA/ATAPI IDE Controllers
icon.
Your IDE channels will appear.
6. Right-click the
Primary IDE Channel
icon.
7. Click
Properties
.
8. In the
Properties
dialog box, click the
Advanced Settings
tab.
9. Click the
DMA if available
check box to select it.
10.Click the
OK
button.