INSTRUCTION
MANUAL
16
Electrical Connection
⚫
Your oven requires 40 Amp fuse for mono phase or 3x16 Amp fuse or 3 phase supply according to electrical power
for cooker section has 4 ceramic heater and oven section has electric models. Installation by a qualified electrician is
mandatory.
⚫
Your oven is adjusted in compliance with 220-240V / 380-415V AC,50/60Hz. electric supply. If the mains are different
from this specified value, contact your authorized service.
⚫
Electrical connection of the oven should only be made to connections /sockets with an earth system installed in
compliance with local regulations. If there are no connections/sockets with an earth system in place where the oven
will be installed, immediately contact a qualified electrician to install. The manufacturer is not responsible for
damages that will arise because of the appliance not be connected to an earth system.
⚫
If your supply cable gets damaged, it should be replaced by an authorized service agent or qualified electrician in
order to avoid danger or electric shock.
⚫
Electrical cable should not touch the hot parts of the appliance.
⚫
The oven should be using a well ventilation place and should be installed on flat ground.
⚫
Operate your oven in dry atmosphere.
⚫
When placing your oven to its location, ensure that it is at the counter level. Bring it to the counter level by adjusting
the feet if necessary.
To Next Page
Loading...
