9
Please note that only the cylinders provided with a cumulative
test certificate (in compliance with PED 97/23/CE Directive) can
be pressurized within the time period specified in the above cer-
tificate.
In Europe, the cumulative test certificate (in compliance with
PED 97/23/CE Directive) has a 4-year validity for new cylinders,
and a 2-year validity after each following successful test.
In Winter or during a long time of inactivity about 30 bar of air
must remain inside the cylinders. Tighten the taps and lubricate
them with silicone grease to protect chrome parts from salt.
Before using the cylinder again, open the valve slightly to let out
the air very slowly in order to prevent condensation from form-
ing inside the cylinders.
Check the valves and the cylinders. Pressurize them. Make sure
the compressor supplies pure air in compliance with UNI EN
12021 standard.
Cressi-sub scuba equipment complies with all the provisions of
UNI EN 250 and bears the CE mark followed by the year of man-
ufacture and the certifying body identification number (0474).
The air supplied by Cressi-sub scuba equipment is breathable in
compliance with UNI EN 12021 standard.
Rubinetteria 27-09-2005 15:09 Pagina 9
To Next Page
Loading...
