Crest Audio CR-4 - Page 30

30
1.6.2 Freediving Mode Settings
Description: Freediving Depth Alarm
Setting
To Access: Under Freediving Preview
Mode, press UP Button Or from
SETTINGS, press UP Button / DOWN
Button; until the cursor aligns with FDPTH-
THD1 to FDPTH – THD3. Press MODE
Button once.
One of the FDPTH-THD1 options will be
blinking at the bottom. Press UP Button /
DOWN Button to select other options as
needed. Press MODE Button to accept
your selection. If you set the FDPTH-ALM
on, when you reach the preset depth, the
alarm will activate.
Default alarm options:
10m, 20m, 30m
Freediving Depth Alarm Setting range:
0m – 100m
Description: Freediving Surface Interval
Alarm Setting
To Access: Under Freediving Preview
Mode, press UP Button Or from
SETTINGS, press UP Button / DOWN
Button; until the cursor aligns with FSI-
THD1 to FSI– THD3. Press MODE Button
once.
One of the FSI-THD1 options will be
blinking at the bottom. Press UP Button /
DOWN Button to select other options as
needed. Press MODE Button to accept
your selection. If you set the FTIME-ALM
on, when you reach the preset time, the
alarm will activate.
Default alarm options:
1mins, 2 mins, 3 mins.
Freediving Surface Interval Alarm Setting
range:
0mins – 60 mins