2.8 Maintenance
The system doesn’t need maintenance.
In case of malfunctioning the system shall be shipped to the supplier to be checked by our authorized
engineers. Not being permitted the opening of the system and the access to its internal components, the
system hasn’t got risk for the user.
2.9 Installing X-Light Drivers
Connect the USB cable to the X-Light V2
TP
unit and to the computer. Wait that the system discovers the new
hardware. When the 'Found New Hardware Wizard' comes up select the folder “X32-X64 bit Windows” on
the CD supplied with X-Light and install the drivers.
You can refer to the internet page http://www.ftdichip.com/FTDrivers.htm to get latest version of the drivers
and for support.
To Next Page