crest Optics X-Light V2 TP

Need help?

Do you have a question about the crest Optics X-Light V2 TP and is the answer not in the manual?

Summary

1.0 X-Light V2 TP Hardware

1.1 X-Light V2 TP Description

Detailed description of the X-Light V2TP hardware components and capabilities.

1.2 X-Light V2 TP Specifications

2.0 X-Light V2 TP Installation

2.1 X-Light V2 TP Components

2.2.2 Changing Emission Filters and Dichroic Mirrors

2.3 Power Supply and Connectors

2.3.3 Laser Safety Interlock

Explanation of the laser safety interlock mechanism and its function when the top panel is removed.

2.4 Attaching X-Light V2 TP to the Microscope

Instructions for physically mounting the X-Light V2TP unit onto various microscope models.

2.6 Attaching the Camera

Guide on how to mount CCD/sCMOS cameras to the X-Light V2TP confocal head adapter.

2.7 X-Light Alignment

Procedure for aligning the X-Light V2TP, focusing on the pinholes for sharp imaging.

Adjusting the Excitation Light Path

Instructions for adjusting the excitation light path, including angular and XY adjustments for optimal illumination efficiency.

Excitation Angle Alignment

XY Adjustment

2.9 Installing X-Light Drivers

3.0 X-Light V2 TP Options

3.1 VCS - Video Confocal Super-resolution

Detailed explanation of the VCS module for enhanced video confocal super-resolution imaging.

3.1.3 VCS Module Alignment Procedure

Step-by-step instructions for aligning the VCS module with the X-Light V2TP.

3.1.4 VCS Mask Replacement

VCS Mask Replacement Procedure

4.0 X-Light V2 TP Command Sets

X-Light V2 TP Devices

Command Conventions

Rules and guidelines for formatting and sending commands to the X-Light V2TP system.

Device ID Command Format