DEVICE ID – Move Device (C , D , N)
Format <device ID><position><CR>
Parameters <device ID> ID assigned to a device (see table on page 1)
<position> Desired position or state
Return Value <device ID><position><CR>
End of action execution: <device ID><position><CR>
Examples D1<CR> D1<CR> Disk 40um
C2<CR> C2<CR> Dichroic Wheel 2
D2<CR> D2<CR> Disk 70um
Macro available:
BxCx<CR>
Examples B2C3<CR> B2C3<CR> Dichroic Wheel 2 Emission Wheel 3
Available on version > 2.4.4
If any device not responding the system send: <device>0<CR>
Examples B2<CR> B0<CR> Dichroic Wheel is damaged
To Next Page
Loading...