H – Rehome all devices
Format H<CR>
Parameters NULL
Return Value setting: HB1C1D0N0<CR>
Examples H<CR> HB1C1D0N0<CR>
R – Response Activation: Turn on/off responses to Host
Format R<active><CR>
Parameters <active> 0 = no response sent to host (no echo)
1 = responses sent to host
Return Value If <active> = 0, no response
If <active> = 1, R1<CR>
Examples R0<CR>
R1<CR> R1<CR>
this command generate always a response to the host.
To Next Page