Crestron AM-200 - Port Map 1: Ports Used by the AirMedia Guest and Deployable Applications

12 • AirMedia Presentation Gateway Deployment Guide – DOC. 7693K
The AirMedia application requires firewall rules to allow it to communicate with AM-100
and AM-101 devices. Crestron requires creating a rule for the application that allows all
traffic to pass to the device. If the rule is not created, the operating system prompts the
user with the option to add a rule. This may require administrator privileges.
For the set of ports that allow the client to communicate with the device, refer to the
table below.
Port Map 1: Ports Used by the AirMedia Guest and Deployable Applications
PORT TYPE DIRECTION FUNCTION OPEN NOTES
80 TCP Both Projector
Control
Optional This port is used to turn on a Crestron
Connected projector. If this port is blocked,
the device functions normally, but the
automatic projector power on feature does
not work.
389
443
445
TCP Both Control
Channel
Required For best performance, Crestron recommends
that ports 389, 443, and 445 be open. At a
minimum, one port needs to be open for the
device to function properly. If only one port is
open and that port is used by another
application, AirMedia will not function
properly.
515 TCP Both Video Required This port is for the video data channel.
1041 TCP Outbound Control
Channel
Required If this port is not open, AirMedia does not
function properly.
1047
1048
1049
UDP Inbound Discovery Optional These ports are used for device discovery. If
the port is closed, AirMedia may not be able
to find devices automatically.
1688 TCP Both Audio Recommended This port is for the audio data channel.
3268 TCP Both Control
Channel
Required This port is used as part of the screen
sharing process.
7000 TCP Both Control
Channel
Required This port is used for client control of the
device. If this port is closed, the AirMedia
Presentation Gateway will not function
correctly.
7100 TCP Both Control
Channel
Required This port is used for client control of the
device. If this port is closed, the AirMedia
Presentation Gateway will not function
correctly.
7200 -
7201
TCP Both Control
Channel
Required This port carries control channel information.
If this port is blocked, AirMedia will not
function.
8080 TCP Both Video Required This port is for the video data channel. If the
port is not open, AirMedia does not function
properly.
19996 TCP Both Future Optional This port is reserved for future use.
31865 TCP Both Discovery Optional This port is used for device discovery. If this
port is closed, AirMedia may not be able to
find devices automatically.
47000 TCP Both Control
Channel
Required This port is used for client control of the
device. If this port is closed, the AirMedia
Presentation Gateway will not function
correctly.