Crestron AM-200 - Port Map 2: Ports Used by AirMedia 2.0 Presentation Gateways (AM-200, AM-300, DMPS3, CCS-UC-1) and AM-101 for macOS, iOS and Android full-screen mirroring; Port Map 3: Ports Used by the AirMedia Presentation Gateway (AM-100 and AM-101)

Deployment Guide – DOC. 7693K AirMedia Presentation Gateway • 13
For the ports used by AirMedia 2.0 Presentation Gateways such as the AM-200,
AM-300, DMPS3, CCS-UC-1, or for AM-101 devices using full-screen mirroring on mobile
devices and macOS, refer to the table below.
Port Map 2: Ports Used by AirMedia 2.0 Presentation Gateways (AM-200, AM-300, DMPS3,
CCS-UC-1) and AM-101 for macOS, iOS and Android full-screen mirroring
PORT TYPE DIRECTION FUNCTION OPEN NOTES
4100 -
4101
UDP Both Control
Channel
Required This pot carries control channel information.
If this port is blocked, AirMedia will not
function.
5353 UDP Both Discovery Optional This port is for AirMedia Presentation
Gateway discovery. If this port is blocked,
automatic network discovery will not
function correctly.
6000-
7000
TCP,
UDP
Both Audio, Video Required These ports carry audio and video streams. If
these ports are blocked, AirMedia will not
function.
7011 UDP Both Control
Channel
Required This port carries control channel information.
If this port is blocked, AirMedia will not
function.
7200
- 7201
TCP Both Control
Channel
Required This port carries control channel information.
If this port is blocked, AirMedia will not
function.
47010 TCP Both Audio, Video Required This port carries audio and video. If this port
is blocked, AirMedia will not function.
For the ports used by the AM-100 and AM-101, refer to the table below.
Port Map 3: Ports Used by the AirMedia Presentation Gateway (AM-100 and AM-101)
PORT TYPE DIRECTION FUNCTION OPEN NOTES
21 TCP Both Update Utility Optional This port is used only to transfer the
firmware to the device with the batch
update application. This port is not used
when updating with the web interface.
80 TCP Both Web Services Required This port is used to access the AirMedia
device configuration website.
137 TCP Both NetBIOS
Discovery
Optional This port allows the device to be resolved
without a DNS server present. This port is
enabled if the hostname is fewer than 15
characters.
138 UDP Both NetBIOS
Discovery
Optional This port allows the device to be resolved
without a DNS server present. This port is
enabled if the hostname is fewer than 15
characters.
41794 TCP Both Control System Required This port is used to control Crestron
Connected devices.
42891
42892
TCP Both Update Utility Required These ports are used to control firmware
updates and are used only with the batch
update application. These ports are not used
when updating the device with the web
interface.