Remote Temperature/Humidity Sensor Crestron C2N-RTHS
Specifications
SPECIFICATION DETAILS
Default ID 2B
Control System Update
Files
1, 2, 3
2-Series Control System
CNMSX-AV/Pro Update File
CNRACKX/-DP Update File
CEN/CN-TVAV Update File
Version 2.004.CUZ or later
Version 5.12.63X.UPZ or later
Version 5.12.63W.UPZ or later
Version 5.12.63V.UPZ or later
Firmware Version C2N-RTHS.V1.4.UPG
Temperature Range -40º to 176ºF (-40º to 80ºC)
0.1ºF (0.1ºC) Output Resolution
1.0ºF (0.5ºC) Accuracy
Humidity Range 0 to 100% RH
1% RH Output Resolution
5% RH Accuracy
Power 24 VDC @ 10 mA maximum
(<1 W) Provided by Cresnet
Dimensions 1 inch (2.54 cm) Tube Diameter
2.22 inch (5.64 cm) Tube Length
1.5 inch (3.81 cm) Front Disk
1 The latest versions can be obtained from the Crestron website. Refer to the NOTE
below.
2 Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest
Crestron Product Catalog for a complete list of 2-Series control systems.
3 Filenames for CNX and ST-CP update files have a UPZ extension. Files on the
website may be .zip or self-extracting .exe files containing the .cuz or .upz file. All
can be obtained from the Downloads section of the Crestron website. To avoid
program problems, make sure you are using the update file with the correct suffix
letter (e.g., S, V, W, X).
NOTE: Crestron software and any files on the website are for Authorized
Crestron dealers and Crestron Authorized Independent Programmers
(CAIP) only. New users may be required to register to obtain access to
certain areas of the site (including the FTP site).
2 • Remote Temperature/Humidity Sensors Operations & Installation Guide – DOC. 6232A
To Next Page
Loading...
Need help?
General
