35 • CEN-GW1 and CENI-GW1 Product Manual — Doc. 9195A
4. If the user is a member of the Active Directory® credential management group, select
Active Directory User.
5. Click OK.
802.1x Configuration
The 802.1X standard is an IEEE network standard designed to enhance the security of wireless
and Ethernet LANs. The standard relies on the exchange of messages between the device and
the network's host, or authentication server.
The device has built-in support for the 802.1X standard to allow communication with the
authentication server and access to protected corporate networks.
Enable IEEE 802.1x Configuration and select the desired method of authentication.
Turn On IEEE 802.1x Authentication
To turn on authentication, select IEEE 802.1x Authentication.
Select an Authentication Method
To select an authentication method, select EAP-TLS Certificate or EAP MSCHAP V2- password
from the Authentication Method drop-down menu.
If EAP MSCHAP V2- password is selected, enter the Domain, Username, and Password.
To Next Page
Loading...
