infiNET™ Dimmers Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF
“Network Device Tree” with Newly Added infiNET Device
3. Expand the device tree until the MNET ID that is to be changed is visible.
Right-click on the MNET ID, and when the sub-menu appears, select
Change Network ID.
“Network Device Tree” - Sub-Menu
NOTE: Any infiNET dimmer in the Network Device Tree can be
identified using Crestron Toolbox. Right-click a device in the Network
Device Tree and select “Identify this…”. The LED on the dimmer will
flash HIGH. Press a button on the dimmer to identify the device.
20 • infiNET Dimmers: Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF Operations Guide - DOC. 6396
To Next Page
Loading...