Crestron CLW-DIM1 User Manual

infiNET™ Dimmers Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF
CLW-SLVD1RF Shown in White
Physical View of CLW-SLVD1RF (Clockwise from Top; Top, Side, and Front)
1.75 in
(4.45 cm)
3.81 in
(9.68 cm)
4.13 in
(10.48 cm)
3.28 in
(8.32 cm)
1.88 in
(4.77 cm)
2.70 in
(6.86 cm)
1.50 in
(3.81 cm)
The -DIM1RF, -DIM4RF, -DIMS1RF, -DIMS4RF, and -SLVD1RF mount in a
standard wallbox and are covered using a decorative faceplate (not included). All
line voltage connections are made at the rear of the dimmer.
Industry Compliance
These units have been manufactured to comply with UL’s Standards for Safety in
Canada and the United States. Formal approval is pending.
FCC ID: EROCWD1011
Compliance Statement (Part 15.19 )
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
6 • infiNET Dimmers: Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF Operations Guide - DOC. 6396

Crestron CLW-DIM1 Specifications

General

Brand	Crestron
Model	CLW-DIM1
Category	Dimmer
Language	English