Need help?Do you have a question about the Crestron CLW-DIM1 and is the answer not in the manual?
Details the capabilities and operational aspects of the dimmers.
Lists technical specifications like power, frequency, and output.
Describes the physical attributes and dimensions of the dimmers.
Outlines compliance with safety standards like UL and FCC.
Step-by-step instructions for the dimmer acquisition process.
Details how to clear gateway information from a dimmer.
Explains the function of the three-position mode selection switch.
Describes how to store preset lighting levels for different button presses.
Instructions to reset dimmers to factory default settings.
Explains the meaning of different LED indicator patterns.
Guide to using the TSID function for setting MNET IDs.
Lists minimum software versions needed for PC-based programming.
Explains using D3 Pro and SystemBuilder for automatic system programming.
Describes how to program systems using SIMPL Windows software.
Details adding the C2N-MNETGW gateway to a system configuration.
How to configure the Net ID for the C2N-MNETGW gateway.
Steps to add infiNET devices to the C2N-MNETGW gateway in SIMPL Windows.
How to set the MNET ID for a CLW-DIM1RF device in SIMPL Windows.
Explains how to control the dimmer's load connection via programming.
Details establishing PC to device communication for uploads and upgrades.
Step-by-step guide to upload SIMPL Windows programs.
Instructions for upgrading the device firmware to the latest version.
A table listing common problems, causes, and corrective actions.
Explains how to enter the bootloader for firmware recovery or upgrade.
Information on how to get additional help or support from Crestron.
Notes on how future updates to the manual will be provided.
To Next Page
General