Crestron DigitalMedia DM-TX-200 - Page 10

DigitalMedia™ CAT Transmitter 200 Crestron DM-TX-200
DM-TX-200 Specifications (Continued)
SPECIFICATION DETAILS
Video
Input Resolutions (Continued)
HDMI & DVI Interlaced
720 x 480 @ 30 Hz (480i),
720 x 576 @ 25 Hz (576i),
1920 x 1080 @ 25 Hz (1080i25),
1920 x 1080 @ 30 Hz (1080i30),
plus any other resolution allowed by HDMI
up to 165 MHz pixel clock
RGB
640 x 480 @ 60 Hz,
720 x 480 @ 60 Hz (480p),
720 x 576 @ 50 Hz (576p),
800 x 600 @ 60 Hz,
848 x 480 @ 60 Hz,
1024 x 768 @ 60 Hz,
1280 x 720 @ 50 Hz (720p50),
1280 x 720 @ 60 Hz (720p60),
1280 x 768 @ 60 Hz,
1280 x 800 @ 60 Hz,
1280 x 960 @ 60 Hz,
1280 x 1024 @ 60 Hz,
1360 x 768 @ 60 Hz,
1366 x 768 @ 60 Hz,
1400 x 1050 @ 60 Hz,
1440 x 900 @ 60 Hz,
1600 x 1200 @ 60 Hz,
1680 x 1050 @ 60 Hz,
1920 x 1080 @ 24 Hz (1080p24),
1920 x 1080 @ 50 Hz (1080p50),
1920 x 1080 @ 60 Hz (1080p60),
1920 x 1200 @ 60 Hz,
2048 x 1080 @ 24 Hz,
2048 x 1152 @ 60 Hz
Component
2
480i, 576i, 480p, 576p, 720p50, 720p60,
1080i25 (1125 lines), 1080i30, 1080p30,
1080p50 (1125 lines), 1080p60
Composite and S-video
2
480i, 576
Output Resolutions Matched to inputs
Analog to Digital Conversion 10-bit 165 MHz per each of three channels
Audio
Switcher 2x1 combination digital/analog switch
Input Signal Types
HDMI, DisplayPort Multimode
1
, analog
stereo
Output Signal Type
DM CAT
(DigitalMedia over twisted pair copper wire)
Formats, HDMI
Dolby Digital
®
, Dolby Digital EX, DTS
®
,
DTS-ES, DTS 96/24 5.1, up to 8ch PCM
Formats, Analog Stereo 2-channel
Analog to Digital Conversion 24-bit 48 kHz
(Continued on following page)
6 • DigitalMedia™ CAT Transmitter 200: DM-TX-200 Operations & Installation Guide – DOC. 6741C