Need help?Do you have a question about the Crestron DM-TX-201-C and is the answer not in the manual?
General| Type | Network transmitter |
|---|---|
| Duplex system | Full, Half |
| Auto-negotiation | Yes |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Maximum transfer distance | - m |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.3at |
| RJ-45 ports quantity (transmitter) | 2 |
| Product color | Black |
| Output current | 0.75 A |
| Output voltage | 24 V |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 32 mm |
|---|---|
| Width | 187 mm |
| Height | 165 mm |
| Weight | 721 g |
Details the device's capabilities, including AV switching, signal transport, and connectivity options.
Explains the DigitalMedia 8G+ technology for high-definition signal transport over twisted pair cable.
Describes the device's role in connecting and switching computer and AV sources via HDMI and RGB inputs.
Covers the Ethernet port for network device connection and system communication.
Details the USB port's functionality for controlling remote devices.
Explains how the device manages EDID information for reliable display and source compatibility.
Describes using HDMI CEC for controlling connected source devices.
Highlights the device's physical design and mounting flexibility.
Explains how the device integrates older AV systems with DigitalMedia.
Illustrates a typical system setup where the device operates independently of a DM switcher.
Provides guidance on selecting and installing appropriate network cables for DM systems.
Explains the importance and assignment of IP IDs for device identification in the system.
Details the procedure for physically mounting the device on walls or ceilings.
Describes how to securely attach the device to a standard rack rail.
Lists the necessary software versions for configuring and controlling the device.
Guides users on using SIMPL Windows software to program the device's functionality.
Outlines the steps to establish a connection between the PC and the device for updates.
Explains the process of updating the device's firmware for new features or fixes.
Introduces DMTool for configuring EDID, HDCP, and troubleshooting AV issues.
Provides a table with common issues and their corrective actions for the device.
Lists additional Crestron documentation for further technical information and support.
Offers contact information and resources for additional support and questions.
Details the procedures for returning products for credit, exchange, or repair.
Outlines the terms and conditions of the product's limited warranty coverage.
Specifies the terms and conditions governing the use and distribution of the software under the GNU GPL.
To Next Page
