Crestron DM-TX-200 DigitalMedia™ CAT Transmitter 200
Specifications
Specifications for the DM-TX-200 are listed in the following table.
DM-TX-200 Specifications
SPECIFICATION DETAILS
Video
Switcher
2x1 combination digital/analog switch,
Crestron QuickSwitch HD
Input Signal Types
HDMI, DVI
1
, DisplayPort Multimode
1
, RGB,
component (YP
b
P
r
)
2
, S-video (Y/C)
2
,
composite
2
Output Signal Type
DM CAT
(DigitalMedia over twisted pair copper wire)
Formats
HDMI, DVI v. 1.0, HDCP v.1.2 content
protection support, RGBHV up to
UXGA/WUXGA, HDTV up to 1080p60,
NTSC or PAL
Input Resolutions
HDMI & DVI Progressive
640 x 480 @ 60 Hz,
720 x 480 @ 60 Hz (480p),
720 x 576 @ 50 Hz (576p),
800 x 600 @ 60 Hz,
848 x 480 @ 60 Hz,
852 x 480 @ 60 Hz,
854 x 480 @ 60 Hz,
1024 x 768 @ 60 Hz,
1024 x 852 @ 60 Hz,
1024 x 1024 @ 60 Hz,
1280 x 720 @ 50 Hz (720p50),
1280 x 720 @ 60 Hz (720p60),
1280 x 768 @ 60 Hz,
1280 x 800 @ 60 Hz,
1280 x 960 @ 60 Hz,
1280 x 1024 @ 60 Hz,
1360 x 768 @ 60 Hz,
1365 x 1024 @ 60 Hz,
1366 x 768 @ 60 Hz,
1400 x 1050 @ 60 Hz,
1440 x 900 @ 60 Hz,
1600 x 900 @ 60 Hz,
1600 x 1200 @ 60 Hz,
1680 x 1050 @ 60 Hz,
1920 x 1080 @ 24 Hz (1080p24),
1920 x 1080 @ 25 Hz (1080p25),
1920 x 1080 @ 50 Hz (1080p50),
1920 x 1080 @ 60 Hz (1080p60),
1920 x 1200 @ 60 Hz,
2048 x 1080 @ 24 Hz,
2048 x 1152 @ 60 Hz,
plus any other resolution allowed by HDMI
up to 165 MHz pixel clock
(Continued on following page)
Operations & Installation Guide – DOC. 6741C DigitalMedia™ CAT Transmitter 200: DM-TX-200 • 5
To Next Page
Loading...
