Crestron DM-RMC-200-C User Manual

Crestron DM-RMC-200-C DigitalMedia 8G+™ Receiver 200
DM-RMC-200-C Specifications (Continued)
SPECIFICATION DETAILS
Available Accessories
CBL-HD Crestron Certified HDMI Interface Cable
CBL-HD-DVI
Crestron Certified HDMI to DVI Interface
Cable
CBL-RCA2
Crestron
®
Certified RCA Stereo Audio
Interface Cable
CBL-SPK-P-35 Speaker Cable, 16 AWG, Plenum, 35 ft
CNSP-XX Custom Serial Interface Cable
DM-CBL-8G DigitalMedia 8G Cable
DM-8G-CONN-100 DigitalMedia 8G Cable Connectors
Excite™ Series In-Wall and In-Ceiling Speakers
FS6
6.5” 2-Way Surface Mount Speakers,
Pair
FSDI8 8” Drop-in Ceiling Speakers, Pair
IRP2 IR Emitter Probe
MP-WP100
Media Presentation Wall Plate – RCA
Stereo Audio
MP-WP140
Media Presentation Wall Plate – DVI with
Mini-TRS Stereo Audio
MP-WP152 Media Presentation Wall Plate – HDMI
MP-WP181-C
Media Presentation Wall Plate –
DigitalMedia 8G+
MPI-WP100
Media Presentation Wall Plate –
International Version – RCA Stereo Audio
MPI-WP150
Media Presentation Wall Plate –
International Version – HDMI
MPI-WP181-C
Media Presentation Wall Plate –
International Version – DigitalMedia 8G+
1. Using the DMTool in Crestron Toolbox™, the scaler can be enabled/disabled.
2. Automatically passes 3D video if display device supports it (reverts to pass-through mode
without scaling). Provides automatic 3D-to-2D conversion if display device does not support 3D.
3. Video wall processing requires a separate DM-RMC-200-C for each individual display.
4. For DM 8G+ wiring up to 330 feet (100 meters) between devices, use Crestron DM-CBL-8G
DigitalMedia 8G cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D
cable, or generic CAT5e (or better) UTP or STP. Shielded cable and connectors are recommended to
safeguard against unpredictable environmental electrical noise which may impact performance at
resolutions above 1080p. Refer to the latest version of the Crestron DigitalMedia Infrastructure Guide
(Doc. 4556) for complete wiring guidelines and to the Crestron DigitalMedia Design Guide (Doc.
4789) for complete system design guidelines.
5. HDMI requires an appropriate adapter or interface cable to accommodate a DVI signal.
CBL-HD-DVI interface cable sold separately.
6. With or without reduced blanking.
7. With reduced blanking only.
8. Using the DMTool in Crestron Toolbox, the amplifier can be enabled/disabled.
9. The latest software versions can be obtained from the Crestron Web site. Refer to the NOTE
following these footnotes.
10. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
NOTE: Crestron software and any files on the Web site are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Operations & Installation Guide – DOC. 7126B DigitalMedia 8G+™ Receiver 200: DM-RMC-200-C • 9

Crestron DM-RMC-200-C Specifications

General

Type	AV receiver
Material	Metal
Product color	Black
Maximum resolution	2048 x 1152 pixels
Maximum refresh rate	60 Hz
Ethernet LAN	Yes
RJ-45 input ports	1
Connectivity technology	Wired
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	47 mm
Width	276 mm
Height	202 mm
Weight	1480 g