Crestron TPS-6 Isys™ 5.7” Tilt Touchpanel
The IP TABLE EDITOR also has DN and UP buttons for the optional DEV ID and
PORT settings. Touch the Default Port button to reset the PORT to its factory
default setting.
To verify the latest status of connections listed in the IP table, touch Update IP
Table.
AUDIO
From the SETUP MODE menu, touch AUDI0 VIDEO to enter the AUDIO SETUP
menu.
AUDIO SETUP Menu
The AUDIO SETUP menu offers a pair of buttons that allow muting of the key click
sound for either the Soft Keys (on screen buttons) or the Hard Keys (buttons on the
front of the touchpanel).
Refer to the following table for additional AUDIO SETUP menu details.
Audio Setup Details
AUDIO SETUP
SCREEN
CONTROL
DESCRIPTION
Soft Keys Mute Toggles the key click sound for on screen soft key presses.
Hard Keys Mute Toggles the key click sound for touchpanel hard key presses.
After audio parameters have been set, touch RETURN to go back to the SETUP
MODE menu or MAIN MENU.
Operations Guide – DOC. 6945A Isys™ 5.7” Tilt Touchpanel: TPS-6 • 15