Isys™ 5.7” Tilt Touchpanel Crestron TPS-6
Pushbutton Programming
Any of the buttons can be programmed to access any frequently used command.
Each button has a permanently fixed digital join number. Refer to the following
illustration for their assigned join numbers. A description for each button signal is
described in the SIMPL Windows help file (F1).
Pushbutton Layout and Join Number Assignment
7
8
5
6
1
2
3
4
9
10
14
15
11
16
12
13
17
NOTE: Join numbers 16 and 17 are fixed for the two “trigger” keys, the
top-mounted pushbuttons on the TPS-6. The left trigger key toggles power when the
unit is undocked and initiates Sleep mode when docked. In addition, when held for
five seconds, it initiates a touchpanel reset. The right trigger key toggles screen
brightness, unless it is disabled with the on-screen button in the BACKLIGHT
SETUP menu (refer to “BACKLIGHT” which starts on page 24).
While both of these join numbers can be programmed to perform other functions,
their main functions as outlined above will still be in effect, i.e. each button will
perform both its default and its newly programmed operation.
36 • Isys™ 5.7” Tilt Touchpanel: TPS-6 Operations Guide – DOC. 6945A
To Next Page
Loading...
Need help?
General
