Crestron IV-CAMFL-N-W-1B User Manual

28 • IV-CAMFL-N-W-1B Product Manual — Doc. 9321A
OSD Menu Tree
<VIDEO> IMAGE MODE MODE1, MODE2, MODE3
EXPOSURE 1, 2, 3, 4, 5, 6, 7
SHARPNESS 1, 2, 3, 4, 5, 6, 7
2DNR LEVEL OFF, 1, 2, 3, 4, 5, 6, 7
3DNR LEVEL OFF, 1, 2, 3, 4, 5, 6, 7
ANTI-FLICKER OFF, 60 HZ, 50 HZ
LDC LEVEL OFF, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19, 20
D-ZOOM LIMIT X 1, X 1.5, X 2
BLC ON, OFF
<WHITE
BALANCE>
MODE AUTO R.GAIN -7~+7
G.GAIN -7~+7
B.GAIN -7~+7
ONE
PUSH
<SYSTEM> MOUNT MODE STAND,CEILING
DISPLAY MODE SDI, NET
LANGUAGE ENGLISH
<STATUS> ADDRESS 1
PROTOCOL VISCA
BAUD RATE 9600
VIDEO FORMAT 1080P30
FIRMWARE VER 2.0.46
<RESTORE
DEFAULTS>
Image Settings
The IMAGE menu is used to adjust the camera’s video output settings to fit the environment.
SHARPNESS
Used to adjust image sharpness in terms of both focus and contrast.
BRIGHTNESS/CONTRAST/GAMMA
Used to adjust image brightness and the properties of the camera’s automatic exposure
adjustment features.
DNR – Digital Noise Reduction

Crestron IV-CAMFL-N-W-1B Specifications

General

Brand	Crestron
Model	IV-CAMFL-N-W-1B
Category	Security Camera
Language	English