Crestron IV-CAMFL-N-W-1B - Commands

Product Manual — Doc. 9321A IV-CAMFL-N-W-1B • 31
Command Message Comments
No Socket z0 6y 05 FF
(y:Socket No.)
Returned when no command is executed in a socket specified
by the cancel command, or when an invalid socket number is
specified.
Command
Not
Executable
z0 6y 41 FF
(y:Execution
command Socket
No. Inquiry
command:0)
Returned when a command cannot be executed due to current
conditions. For example, when commands controlling the focus
manually are received during auto focus.
z = Device address + 8
Commands
Command Set Command Command Packet Comments
AddressSet Broadcast 88 30 01 FF Address setting
IF_Clear Broadcast 88 01 00 01 FF I/F Clear
Command
Cancel
8x 2p FF p:Socket No. (=1or2)
CAM_Power On 8x 01 04 00 02 FF Power On/Off
Off 8x 01 04 00 03 FF
CAM_Zoom Stop 8x 01 04 07 00 FF
Tele(Standard) 8x 01 04 07 02 FF
Wide(Standard) 8x 01 04 07 03 FF
Tele(Variable) 8x 01 04 07 2p FF p: 0(Low)to 7 (High)
Wide(Variable) 8x 01 04 07 3p FF
Direct 8x01 04 47 0p 0q 0r 0s
FF
p,q,r,s: Zoom Position