Crestron Isys
®
TPS-4L 3.6-Inch Wall Mount Touchpanel
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron’s True Blue Support, log in at http://support.crestron.com.
First-time users will need to establish a user account.
Earliest Version Software Requirements for the PC
NOTE: Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the Crestron
website.
The following are the minimum recommended software versions for the PC:
Software
TASK REQUIRED SOFTWARE VERSION
Program control system to
operate TPS-4L.
SIMPL Windows version 2.06.20 or later
and Library update 361 or later. Also
requires Crestron Database version 17.6.0
or later.
Upload program and firmware. Crestron Toolbox 1.01.06 or later.
For graphical touchscreen
design.
Crestron VisionTools
®
Pro-e version 3.4.2.5
or later.
Program with simple wizards for
QuickMedia systems using a
TPS-4L
(optional but recommended).
Crestron SystemBuilder™ version 2.0.6 or
later with SystemBuilder Templates version
2.0.1 or later. Refer to software release
notes or Crestron website for other required
Crestron software packages.
Create labels for front panel
buttons.
Crestron Engraver 2.6.1.0 or later.
Programming with Crestron SystemBuilder
Crestron SystemBuilder is the easiest method of programming but does not offer as
much flexibility as SIMPL Windows. For additional details, download
SystemBuilder from the Crestron website and examine the extensive help file.
Programming with SIMPL Windows
NOTE: While SIMPL Windows can be used to program the TPS-4L, it is
recommended to use SystemBuilder for configuring a system.
SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate but equally important “Managers”.
Configuration Manager
Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the Device Library.
Operations & Installation Guide – DOC. 6449A 3.6-Inch Wall Mount Touchpanel:
TPS-4L • 17
To Next Page
Loading...
Need help?
General
