Crestron TST-902 Supplemental Guide

Supplemental Guide – DOC. 7750A TST-902: 8.7
"
Wireless Touch Screen
•
1
TST-902: 8.7
"
Wireless Touch Screen
Access the Setup Screens
The setup screens enable basic configuration prior to regular operation of the Crestron
®
TST-902. If no project is loaded, tap the screen to access the setup screens. If a project is
loaded, access the setup screens by using the included pin tool to press the reset button
four times within a 5-second period.
The
TST-902 Setup
screen is displayed.
TST-902 Setup Screen
The
TST-902 Setup
screen is composed of buttons for RF setup, audio setup, display
setup, standby timeout, Wi-Fi
®
setup, and diagnostics. In addition, there is a button to
toggle system messages on or off, an
About
button that provides information about the
touch screen, and a
Save & Exit
button. The functions of each are detailed in the following
pages of this guide.
Reset Button

Crestron TST-902 Specifications

General

Color depth	24 bit
Display type	TFT
Backlight type	LED
Contrast ratio	700:1
Display diagonal	8.7 \
Display brightness	300 cd/m²
Display resolution	1008 x 588 pixels
Touchscreen technology	Projected capacitive system
Audio formats supported	MP3
Wi-Fi	-
Product color	Black
Internal memory	1000 MB
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Power supply location	External
AC adapter output voltage	24 V
Power consumption (typical)	7 W

Weight and Dimensions

Depth	19 mm
Width	264 mm
Height	164 mm
Weight	808 g