l
For U.K.-style installations, use the two provided M3.5 x 25mm
screws to install the rear faceplate over a 2-gang U.K. electrical
box.
NOTE:Four washers are provided to secure the faceplate to
the electrical box if the mounting holes are too large for the
included screws.
3. Press the front faceplate into the rear faceplate until it snaps into
place.
NOTE:Ensure that the front faceplate is oriented so that the
"TOP"machined text is facing upward prior to installation. Also
ensure that the faceplate is level after installation.
2
TSW-770/1070-MSMK-ANG
QuickStart
Multisurface Mount Kit for TSW-770 and TSW-1070 Series, Angled
To Next Page
Loading...
