CrimeStopper CS-2000 - Remote Transmitter Setup; Transmitter Programming and Pairing Procedure

REMOTE TRANSMITTER PROGRAMMING
1. Turn Ignition ON and OFF 3 times quickly, leaving it ON the 3
rd
time. (ON/OFF, ON/OFF, ON) You should
hear (3) chirps.
2. Press the Program/Override Button 5 times and you should hear 5 light flashes and 5 siren chirps.
3. Press #1 (LOCK/UNLOCK) Button on the new transmitter. Siren chirps one time for Code-learn
confirmation. Press #1 Button on a second, third or fourth remote at this time (If needed).
4. Turn off Ignition. Siren will chirp 3 times and lights will flash 3 times for exit confirmation
Note 1: This system will learn a total of 4 transmitters max.
DIAGRAM:
IGN
OFF
TURN IGN. ON
3 TIMES:
ON, OFF
ON, OFF
ON.
5 CHIRPS
PRESS
BUTTON
5 TIMES
PRESS LOCK/UNLOCK
BUTTON
1 CHIRP
5 FLASHES
(CODE LEARNED)
IGN
OFF
PRESS LOCK
ON ANOTHER
REMOTE
OR
3 CHIRPS