38 GB/IE/NI
KM + / -: Kilometer counter.
Press and hold the SET button
20
for 3 seconds
and press the SET button
20
again to request
the kilometer counter settings. The LC display
will show the symbol for increasing or decreas-
ing the number (+ or -) and distance counter
value.
TIME + / -: Timer.
Press and hold the SET button
20
for 3 seconds
to change the timer settings. The LC display
will show the symbol for increasing or de-
creasing the number (+ or -) and timer coun-
ter value.
SCAN: Scan
Note: In scan mode, the display switches auto-
matically between the trip distance, maximum
speed, average speed and trip time.
Note: Refer to the “Changing basic settings“
chapter to configure the settings.
Note: To deactivate scan mode press the MODE
button
14
to return to ADVANCE mode.
To Next Page
Loading...
