41 GB/IE/NI
Replacing the battery
Note: The bicycle computer battery must be
replaced when the battery state indicator
18
is
shown on the LC display . Press and hold the
MODE button
14
first and hold the SET button
20
at the same time and keep them pressed until
the battery symbol and {{----}} are shown on the LC
display. To replace the battery, proceed as shown
in figure A. Open the battery compartment by
turning the battery cap anticlockwise towards to
the
icon using a coin. Remove the old battery
and replace this with a new battery. Please note
the polarity when inserting the battery. This is
shown in the battery compartment. Ensure that the
O-ring is attached correctly before inserting the
battery. Turn the battery cap clockwise towards to
the
icon onto the battery compartment using a
coin to close it. Press and hold any button to return
to normal operating mode.
Note: When the battery has been removed, all
information will be deleted after approx. 20 sec-
onds.
To Next Page
Loading...
