Date/Time
Press [Mode] button to shift and press [UP] [DOWN] button to enter your time, then select [OK] button
to confirm. Date Format options - yyyy/mm/dd, mm/dd/yyyy, dd/mm/yyyy , any one option can be
selected as per the user preference.
Clock Format - Default 12 Hours
24 Hours / 12 Hours
Adjust the time display format on your dash camera to match your preference:
24 Hours: This format displays the time from 00:00 to 23:59,
12 Hours: This option shows the time with AM and PM indicators, cycling from 12:00 AM to 11:59 PM.
Screen Saver Settings
Live Video Always On The screen will always show the recording live video on Screen.
Screen Saver on After 1-Min
The screen will only show the time/live speed if no operation for 1 min.
Screen Saver OFF After 1-Min
The screen will go black if no operation for 1-min, but still recording.
Beep Sound — Default ON
ON/Off
To switch on/ off the beep key tone.
Speaker Volume - Low / Medium / High
This setting helps you control the volume of playback audio. It directly adjusts the loudness of the
sound that the video is currently outputting.
Boot Up Tone —Default ON
ON/Off
Control the audio boot tone confirmation when your dash cam powers on.
On: The device will emit a tone upon starting up, providing an auditory indication that the camera is
operational.
Off: Disables the start-up sound for a silent boot-up.
To Next Page
