Crosscall CORE-X3 - Getting Started; Installing the SIM Card

9
In case of danger:
Press the programmable key, and a call will automatically be made to the person(s)
selected in advance. They will be sent an SMS containing your GPS location.
ADVICE FOR USING YOUR CORE-X3 UNDER WATER
Touch-lock feature
To take photos, you should activate the touch-lock feature which locks your touch
screen (in photo mode, icon at the top of your screen). You can then press a volume
button to take photos (or use the programmable button)
Advice: after immersion
After immersion in seawater; you should rinse your mobile in freshwater.
It may be that the slits of the speaker and microphone are blocked with water. Wait a
few minutes before making a call to get back to optimal functionality.
TIPS FOR GETTING THE MOST OUT OF YOUR CORE-X3
Split-screen mode: opening 2 windows at the same time
You have the option to divide your screen into two. Example: Youtube + Whatsapp.
When your app is open, press and hold the square. Then select the second screen you
want to display.
*Not all apps are compatible with split-screen mode
Deleting open apps in one click: Click on the square (task manager), then swipe through
all screens until you get to the oldest. There you will see the "delete all" option
Configuring multiple languages
For chatting and messaging in more than one language, you can configure several
languages so that your keypad adapts and corrects the language you are currently
using.
Settings > System > Languages and Input > Languages > +Add Language
When writing a message, simply press the space bar and select your language preference.
Adding a user
In the notifications bar, by clicking on the icon, you can open a "guest" account.
Your interface can then be personalised, and you can select appropriate apps for that
account (games for children, account for work, etc.)
GETTING STARTED
Installing the sim card
1. Check that your device is turned o
If not, turn the power o by pressing the On/O button
2. Open the SIM tray using the SIM eject tool provided
a.Take the tool provided
b.Insert it into the hole, as shown below, to eject the SIM tray from its housing.