Crossfire XS-8K - User Manual

Owner’s Manual
XS-8K
XS-8X

Summary

POWER CONNECTIONS

+12 V Power

Connects the amplifier's +12V terminal to the battery's positive terminal via an inline fuse holder.

GROUND

Connects the amplifier's GND terminal to the vehicle chassis, ensuring a rust-free connection.

REMOTE

Connects the REM terminal to the car ignition switch's power antenna terminal using electrical wire.

RCA & SPEAKER CONNECTION

INPUT CONNECTION

Details how to connect the amplifier's input to the head unit using RCA cables.

SPEAKER CONNECTION 1

Illustrates the first method for connecting speakers to the amplifier.

SPEAKER CONNECTION 2

Illustrates a second method for connecting speakers to the amplifier.

DUAL AMP INPUT & SPEAKER CONNECTION (STRAPPED)

MASTER & SLAVE RCA CONNECTION

Explains RCA connection for dual amplifiers in a strapped configuration.

DUAL AMP POWER CONNECTION (STRAPPED)

POWER CONNECTION

Details the power wiring for two amplifiers connected in a strapped configuration.

TROUBLE SHOOTING

NO OUTPUT

Guides on diagnosing and resolving issues where the amplifier produces no sound.

AMPLIFIER SHUT DOWN (PROTECTION)

Explains causes and solutions for amplifier protection mode activation.

DISTORTION & NOISE

Provides steps to troubleshoot audio distortion and unwanted noise.

POOR BASS RESPONSE

Offers solutions for issues related to weak or absent bass output.

Crossfire XS-8K Specifications

General

Channels	1
Damping Factor	>200
Input Sensitivity	0.2V - 6V
Subsonic Filter	10Hz - 50Hz
Operating Voltage	9V - 16V
RMS Power @ 1 Ohm	2400W
Bass Boost	0 - 12dB
Phase Shift	0° - 180°