The equipment described in this manual may have mains voltages applied to it.
Ensure correct safety procedures are adopted before working on the equipment.
The equipment described in this manual is designed for the detection of flammable
and/or toxic gases. Detectors may be sited in hazardous areas. Ensure local safety
procedures are adopted before carrying out any maintenance or calibration work.
The equipment described in this manual may be connected to remote alarms and/
or shutdown systems. Ensure that local operating procedures are adopted before
carrying out any maintenance or calibration work.
This product has been tested and found to comply
with the European Directive 2004/108/EC and the EMC
requirements of EN50270. It also complies with the
Council Directive 2006/95/EC relating to electrical safety
and the Low Voltage Directive. It conforms to the CE
Marking Directive 93/68/EEC.
172 Brook Drive, Milton Park,
Abingdon, Oxon, OX14 4SD, England
© Copyright Crowcon Detection Instruments Ltd 2014
All rights are reserved. No part of the document
may be photocopied, reproduced, or translated to
another language without the prior written consent of
Crowcon Detection Instruments Ltd.
Publication number: M070010
second edition: October 2014
Crowcon Detection Instruments Ltd
172 Brook Drive, Milton Park,
Abingdon OX14 4SD UK
Tel. +44 (0)1235 557700
Fax. +44 (0)1235 557749
www.crowcon.com
Email: sales@crowcon.com
To Next Page
Loading...
