Do you have a question about the Crown 1160MA and is the answer not in the manual?
Total Harmonic Distortion | < 0.5% |
---|---|
Channels | 1 |
Output Impedance | 8 Ohms |
Cooling | Convection cooled |
Input Sensitivity | 1.4V |
Input Impedance | 20 kOhm balanced, 10 kOhm unbalanced |
Damping Factor | > 200 |
Power Output | 160W per channel at 8 ohms |
Frequency Response | 20 Hz - 20 kHz ±1 dB |
Dimensions | 19" x 3.5" x 12" (483mm x 89mm x 305mm) |
Description of controls and indicators on the front panel.
Description of controls and connectors on the back panel.
Guidelines for installing the mixer-amplifier in racks or on surfaces.
Diagram and explanation of typical input and output wiring.
Step-by-step guide for safely powering on the mixer-amplifier.
Diagnosing and resolving issues where the unit does not power on.
Troubleshooting steps for audio distortion problems.
Steps to take when no audio output is detected from the unit.
Detailed technical specifications for 180MA, 280MA, and 1160MA models.
Overview of Crown's limited warranty terms and conditions for new products.
Situations and conditions not covered by the Crown warranty.
Details on how Crown will remedy defects, including repair, replacement, or refund.