1-8. ELECTRICAL DETAILS.
Termination: Screw terminals for 13 AWG to
23 AWG conductors.
Voltage Range: Selectable 120 VAC
or 240 VAC 50/60 Hz.
Battery backup: 24 VDC
Channel A input: Selectable to be 1 Vrms, 25 Vrms,
or 70 Vrms
Channel B input: Selectable to be 1 Vrms, 25 Vrms,
or 70 Vrms
Onboard Amplifier: 15 Watts maximum
Amplifier
Output Voltage: Selectable to be 1 Vrms, 25 Vrms,
or 70 Vrms
Frequency range: -3dB @ 150 Hz -3dB @ 12 kHz
(no load) -6dB @ 85 Hz -6dB @ 24.8 kHz
Monitor Speaker
output: 300mW typical @ 1 kHz, 8 ohm
Maximum switching
current for each zone: 15 AMPS
-5-
To Next Page
Loading...
