Crown LPS-2500 - Wiring - Stereo Mode; Stereo Wiring with Speakon Connectors; Stereo Wiring with Binding Posts

Operation Manual
page 5
LPS Series Power Amplifiers
Wiring
Figure 3. Stereo (Dual) Wiring With Speakon
®
Connectors
Figure 4. Stereo (Dual) Wiring With Binding Post Connectors
STEREO (DUAL) WIRING USING THE SPEAKON
®
CONNECTORS
1. See Figure 3. On the back panel, set the Output Mode Switch to STEREO.
2. Wire the speakers to the Speakon
®
connectors as shown.
STEREO (DUAL) WIRING USING THE BINDING POST CONNECTORS
1. See Figure 4. On the back panel, set the Output Mode Switch to STEREO.
2. Wire the speakers to the binding post connectors as shown.
2 +
1
3
–
Channel 1
Loudspeaker
Channel 2
Loudspeaker
Top Speakon
®
(Channel 1)
Bottom
Speakon
®
(Channel 2)
Input signals
2 +
1
3
–
Input signals