Crunch GROUND POUNDER - Specifications

8
Please read the user‘s manual carefully before the installation and the rst operation
of the amplier.
SPECIFICATIONS
Output Power RMS
Output Power Max
Loudspeaker impedance
Frequency Response
Total Harmonic Distortion
Signal-to-Noise Ratio
Input Sensitivity
Input Impedance
Lowpass Filter
Subsonic Filter
Bass Boost
Phase Shift
High Level Inputs
Auto Turn On
Operating Voltage
Fuse Rating
Dimensions
1 x 400 W @ 4 Ohms
1 x 550 W @ 2 Ohms
1 x 800 W @ 1 Ohm
1 x 800 W @ 4 Ohms
1 x 1100 W @ 2 Ohms
1 x 1600 W @ 1 Ohm
1 – 8 Ohms
5 – 160 Hz (-3 dB)
< 0,12 % (80 Hz)
> 90 dB
HI LEVEL: 1,6 – 13 V
LOW LEVEL: 0,15 – 7,6 V
20 kOhm
40 – 150 Hz @ 12 dB/Octave
10 – 35 Hz @ 12 dB/Octave
0 – 12 dB @ 40 Hz
0 – 180°
Via enclosed Cable Jack
Only via High Level Inputs
+12 V (7,7 – 16,7 V), negative ground
3 x 30 A
254 x 46 x 270 mm
All Specications are subject to change
GPX1600.1D
DISPOSAL/RECYCLING
If you have to dispose the device and its components, please note that no electronic devices must
be disposed in the household waste. Dispose of the device and its components at a suitable recy-
cling facility in accordance with local waste regulations. If necessary, consult your local authority
or dealer.
More information at www.audiodesign.de/english/disposal