ΒΤ 100 USB Bluetooth Dongle Manual
________________________________________________________________________
24
Select Specify TCP/IP addresses and enter the range of IP addresses assigned to
LAP clients.
You can also select Assign TCP/IP addresses automatically using DHCP and the
system will dynamically assign IP addresses.
Notes:
• If you want to use a Windows 98SE/Me system as an access point, a Dial-up
Adapter and the Windows Direct Cable Connection must be already installed.
• If you want to automatically start this service on your computer, go to My
Services → Properties… and select the LAN Access tab.
To Next Page
Loading...
