Services Required:
See nameplate located on the back of the dispenser
Refrigeration System
• Refrigerant Type: R134a, 1.23oz (35g)
• Pressure (Refrigeration): High Side: 265 PSI, Low Side: 140PSI
Water Flow
• The flow rate from the water outlets on the dispenser is a maximum of 0.475 US
Gal/minute (1800 ml/minute)
The customer acknowledges that water, like other liquids, can cause damage to
surfaces. The customer takes full responsibility for placing the cooler within a
residence or business, and acknowledges that failure to address drips, leaks or
spillages is at the customer’s risk.
The Warranty and Underwriters’ Laboratory and CE listings for the coolers are
invalidated if any alteration, modification, or use or misuse in combination with any
other machine or devices is deemed to be the source of any claim. The manufacturer
accepts no liability (including for bodily injury) resulting from any alteration, misuse,
neglect, accidents, improper installations or repairs.
Environmental application temperature: 50~90°F (10~32°C)
The unit is rated IP10. (This unit is not protected against ingress of water)
For more information on this product, please visit www.crystalcoolers.com
To Next Page
Loading...
