RS112 Rugged Server
Operating the Product
If the RS112 is part of a rack configuration, refer to the rack guide for more
information on connecting to a power source.
CONNECTING TO A POWER SOURCE
Please see Installing the Product on page 9 for more information.
POWERING THE SERVER ON
After securely attaching the power connection, press the Power On/Off switch which will
be located on either the front or the back of the chassis depending on the specific
configuration. A blue LED will illuminate when power is applied (see Figure 4, page 16
for location of power switch and more information about the RS112 chassis).
RS112 Rugged Server User Guide Page 14 of 26
To Next Page
Loading...