RS112 Rugged Server
Maintaining the Product
Only qualified service personnel should attempt to open the RS112 chassis. There
are not any user serviceable parts inside.
To protect the equipment from Electrostatic Damage (ESD), follow the proper
precautions at all times when handling the RS112 and its components. Please see
Electrostatic Discharge section on Page 5.
DRIVER UPDATES
Contact Technical Support at one of the options listed on page 6.
CHASSIS ACCESS
Removing the Cover
1.
Ensure the RS112 is powered off and the unit is disconnected from the power source.
2.
Remove the screws connecting the top cover to the chassis using a Phillips screw driver.
3.
Lift the cover to expose the interior of the chassis.
RS112 Rugged Server User Guide Page 15 of 26
To Next Page
Loading...