Need help?Do you have a question about the CS Instruments DS 400 and is the answer not in the manual?
General| Brand | CS Instruments |
|---|---|
| Model | DS 400 |
| Category | Measuring Instruments |
| Language | English |
Defines key terms and abbreviations used in the manual, including MODBUS protocol specifics.
Lists technical specifications and guides related to MODBUS protocols used in the document.
Details technical parameters for the DS400's Modbus RTU interface, including baud rates and electrical interface.
Outlines technical specifications for the DS400's Modbus TCP interface, covering Ethernet and IP settings.
Explains fundamental Modbus concepts like master-slave architecture and mono-master system.
Provides connection diagram and cable specifications for RS485 bus wiring for Modbus RTU.
Describes the requirements for connecting the DS400 to a network using an Ethernet cable.
Guides on how to access and modify Modbus RTU communication parameters, protected by a password.
Explains Modbus Function Code 3 for reading holding registers and associated exceptions.
Details Modbus Function Code 16 for writing multiple registers and its exceptions.
Lists basic Modbus registers for serial number, hostname, hardware version, and calibration date.
Defines Modbus registers for reading channel values (A1-A2, B1-B2, V1-V4), covering multiple data points per channel.
Details Modbus registers for channel status, covering values 1-4 and 5-8 for different channels.
Lists Modbus registers for channel sensor types and names, and value/unit descriptions.
Describes Modbus registers related to alarm settings, including warning and alarm values and hysteresis.
Lists extended Modbus registers for channel value names (long/short), resolution, and future use.
Provides Modbus registers for testing data formats, specifically for Dword and float types.
Explains the bit structure within data values and status fields for Modbus communication.
Lists Modbus registers for defining and assigning user-defined unit names for measurements.
Lists and explains Modbus exception codes used by the DS400 when responding to master requests.
To Next Page
