3
WARNING
Lubricants
Do NOT use Vaseline, oils, hydrocarbon lubricants or spray silicone anywhere! Petroleum base lubricants will cause
swelling of o-rings and seals. The use of other lubricants may attack plastic Noryl®. It is recommended that Dow
Corning® silicone grease be used as a lubricant for all control valves. Dow Corning® 7 Release Compound is used in the
manufacture of Chandler Systems control valves. (Part # LT-150)
Sealants
Pipe dope and liquid thread sealers may contain a carrier that attacks some plastic materials. It is recommended that
Teflon® tape be used to seal plastic Noryl® threaded fittings.
Softener Specifications
General Specifications
MSF32-10D-S2
MSF32-10D-S3
MSF48-15D-S2
MSF48-15D-S3
Regeneration Type
M - Metered M - Metered
Filter Media Capacity 1 cu ft 1.5 cu ft
Softening Capcity 32,000 48,000
Service Flow Rate (gpm)* 5.0 8.0
Intermittent Flow Rate (gpm) 7.0 10.0
Backwash Flow Rate (gpm) 5.0 7.0
Gallons Used / Backwas 130 170
Mineral Tank Size 10 x 65 13 x 65
Space Required 18 x 28 x 73 18 x 31 x 73
Approximate Shipping Weight (lbs) 126 182
* The pressure drop does not exceed 15.0 psi at the service flow rate
To Next Page
Loading...
