15
Notes:
- If the pulse chlorine setting is on (1-4) the minimum time for the Air Replenish/Oxyclean NP Injection cycle step
is forced to 20 minutes.
- If the pulse chlorine setting is set to 4 the minimum time for the Rapid Rinse cycle step is forced to a minimum
of 5 minutes.
- Chlorine injection only occurs on full backwash cycle nights (Based on Filter Backwash Frequency setting). It
does not occur on air recharge cycle nights.
- The Oxyclean NP is an optional accessory, the pulse chlorine setting will only be meaningful if it is installed.
4. Bluetooth Enabled BE - 1 (ON)
BE - 0 (OFF)
- Toggle the setting with the Set / Change button.
5. Bluetooth Password BBPP is displayed for one second, then password is displayed.
- Change the digit values using the Set / Change and Menu / Enter buttons as described above.
6. To Exit the Master Programming Mode, press the Menu/Enter button until time of day returns.
Note: If no buttons are pressed for 60 seconds, the Master Programming Mode will be exited automatically.
Master Programming Mode
To Next Page
Loading...
