Need help?Do you have a question about the CTC Union FMC-1000M and is the answer not in the manual?
Information on product accuracy, liability, and warranty limitations provided by CTC Union Technologies.
Listing of registered trademarks mentioned in the manual, such as Microsoft and HyperTerminal.
Notice regarding FCC compliance for Class A digital devices and potential radio frequency interference.
Statement of compliance with CISPR Class A standards for radio interference characteristics.
Indication of compliance with EMC and LVD directives of the European Community.
Introduction and overview of the FMC-1000M(S) Gigabit Ethernet OAM/IP Web Smart Media Converter.
Detailed description of the FMC-1000M(S) electrical to optical media converter and its models.
Overview of the key features and functionalities supported by the FMC-1000M(S) media converter.
Technical specifications including optical and electrical interfaces, power, and environmental requirements.
Details on the management capabilities of the FMC-1000M(S), including web-based management.
Description of the physical panel layout, LEDs, and factory reset procedure for the FMC-1000M(S).
Information on compatible FMC series chassis options for installing the converter module.
Guidelines for the electrical installation of the converter, including AC and DC power connections.
Step-by-step instructions for inserting and removing Bale Clasp SFP modules from the converter.
Instructions on accessing and logging into the FMC-1000M(S) via its web interface for configuration.
Guidance for diagnosing and resolving common issues with the FMC-1000M(S) media converter.
Information on product accuracy, liability, and warranty limitations provided by CTC Union Technologies.
Listing of registered trademarks mentioned in the manual, such as Microsoft and HyperTerminal.
Notice regarding FCC compliance for Class A digital devices and potential radio frequency interference.
Statement of compliance with CISPR Class A standards for radio interference characteristics.
Indication of compliance with EMC and LVD directives of the European Community.
Introduction and overview of the FMC-1000M(S) Gigabit Ethernet OAM/IP Web Smart Media Converter.
Detailed description of the FMC-1000M(S) electrical to optical media converter and its models.
Overview of the key features and functionalities supported by the FMC-1000M(S) media converter.
Technical specifications including optical and electrical interfaces, power, and environmental requirements.
Details on the management capabilities of the FMC-1000M(S), including web-based management.
Description of the physical panel layout, LEDs, and factory reset procedure for the FMC-1000M(S).
Information on compatible FMC series chassis options for installing the converter module.
Guidelines for the electrical installation of the converter, including AC and DC power connections.
Step-by-step instructions for inserting and removing Bale Clasp SFP modules from the converter.
Instructions on accessing and logging into the FMC-1000M(S) via its web interface for configuration.
Guidance for diagnosing and resolving common issues with the FMC-1000M(S) media converter.
General| Ports | 1 x RJ-45, 1 x SFP |
|---|---|
| Data Rate | 10/100/1000 Mbps |
| Operating Temperature | 0°C to 50°C |
| Standards | IEEE 802.3z |
| Fiber Type | Multi-mode or Single-mode |
| Wavelength | 850nm, 1310nm, 1550nm (depending on SFP module) |
| Connector Type | RJ-45, LC (SFP dependent) |
| Storage Temperature | -20°C to 70°C |
| Humidity | 5% to 90% (non-condensing) |
| Power Supply | 5V DC, 1A |
To Next Page
