CTC Union FMC-2000MS - User Manual

Need help?

Do you have a question about the CTC Union FMC-2000MS and is the answer not in the manual?

Summary

Provides a detailed overview of the FMC-2000MS Gigabit Ethernet OAM/IP Media Converter's capabilities and design.

Lists the key functionalities and supported technologies of the FMC-2000MS, including auto-negotiation and VLAN support.

Details the technical specifications of the FMC-2000MS, covering optical, electrical, and performance parameters.

Explains the meaning and status of each LED on the FMC-2000MS for monitoring device activity.

Explains the procedures for connecting power to the FMC-2000MS, covering both AC and DC power options.

Details the process of inserting and removing SFP modules into the FMC-2000MS, focusing on bale clasp type modules.

Guides users through connecting to the FMC-2000MS via its USB Type-C console port for initial setup.

Explains how to configure the FMC-2000MS using its web-based graphical user interface (GUI).

Details how to set the management IP address, subnet mask, and gateway for the FMC-2000MS.

Details how to set up and manage Virtual LANs (VLANs) on the FMC-2000MS for network segmentation.

Outlines essential maintenance tasks for the FMC-2000MS, including device restarts and factory defaults.

Describes how to restore the FMC-2000MS to its factory default settings to resolve configuration issues.

Provides guidance on interpreting the status of the LEDs on the FMC-2000MS to diagnose operational issues.

Outlines methods for verifying the correct operation of the FMC-2000MS, including ping tests and converter checks.

Lists and describes the Management Information Base (MIB) objects relevant to the FMC-2000MS device.

General