32
3.1.12 QoS
The Quality of Service (QoS), in this device, refers to the egress bandwidth control and the broadcast storm protection.
{ QoS }
<1> Bandwidth Control
<2> Storm Policing
<1> Bandwidth Control: Provides egress rate limiting for both the LAN and Fiber ports.
{ QoS > Bandwidth }
[Egress]
<1> FIBER Port Rate Limit [Disable]
<2> LAN Port Rate Limit [Disable]
<1> Egress Fiber Port Rate Limit: The outgoing rate limit, in Kbps, can be set on the Fiber port. The rate is set with a granularity of 64Kbps,
from 1 (64Kbps) to 16000 (1024000Kbps). Packets will be held at the defined outgoing rate.
<2> Egress LAN Port Rate Limit: The outgoing rate limit, in Kbps, can be set on the LAN port. The rate is set with a granularity of 64Kbps,
from 1 (64Kbps) to 16000 (1024000Kbps). Packets will be held at the defined outgoing rate.
[ESC] Go to previous menu. Please select an item.
----------------------------------------------------------
0: Disable, else: Rate = keyin value x 64k pbs
Rate:
Set the rate limit to zero (0) to disable limiting.
To Next Page
Loading...
