Need help?Do you have a question about the CTC Union FRM220-2000MS and is the answer not in the manual?
Lists registered trademarks used in the manual, such as Microsoft Corp. and Hilgraeve Inc.
States compliance with FCC Part 15 rules for Class A digital devices and potential interference.
Confirms compliance with European EMC directive and EN 55022 standard.
Indicates compliance with EMC and LVD directives and relevant EN standards.
Introduction to the user manual and its intended audience.
Details the FRM220-2000MS as an electrical to optical media converter for Gigabit Ethernet.
Lists key capabilities such as Auto-Cross, Dual Rate SFP support, 802.3x flow control, Jumbo Frames, and VLANs.
Provides detailed technical specifications for optical, electrical, Ethernet, power, management, dimensions, weight, and certifications.
Illustrates the front panel components including SFP slot, RJ-45 port, LEDs, and console port.
Explains the meaning of each LED indicator (PWR, FX LNK, LAN LNK, LAN Speed, FX Speed) and their states.
Details the steps to perform a factory reset using the recessed push-button switch.
Describes the FRM220 series chassis compatible with the FRM220-2000MS converter cards.
Explains AC and DC power connections to the chassis and proper grounding procedures.
Covers installation for AC+DC built-in power types, including connection and power supply.
Guides on inserting and removing Bale Clasp type SFP modules into the SFP cage.
Details how to connect and configure the device using a console port and terminal emulation software.
Explains how to access and configure the device using its Web GUI interface.
Provides steps for factory default reset and the default TCP/IP settings.
Guides on interpreting LED indicators for troubleshooting issues like power or link status.
Describes methods to verify converter operation, including ping tests and web access.
Lists MIB objects, OIDs, access levels, and descriptions for management.
Lists registered trademarks used in the manual, such as Microsoft Corp. and Hilgraeve Inc.
States compliance with FCC Part 15 rules for Class A digital devices and potential interference.
Confirms compliance with European EMC directive and EN 55022 standard.
Indicates compliance with EMC and LVD directives and relevant EN standards.
Introduction to the user manual and its intended audience.
Details the FRM220-2000MS as an electrical to optical media converter for Gigabit Ethernet.
Lists key capabilities such as Auto-Cross, Dual Rate SFP support, 802.3x flow control, Jumbo Frames, and VLANs.
Provides detailed technical specifications for optical, electrical, Ethernet, power, management, dimensions, weight, and certifications.
Illustrates the front panel components including SFP slot, RJ-45 port, LEDs, and console port.
Explains the meaning of each LED indicator (PWR, FX LNK, LAN LNK, LAN Speed, FX Speed) and their states.
Details the steps to perform a factory reset using the recessed push-button switch.
Describes the FRM220 series chassis compatible with the FRM220-2000MS converter cards.
Explains AC and DC power connections to the chassis and proper grounding procedures.
Covers installation for AC+DC built-in power types, including connection and power supply.
Guides on inserting and removing Bale Clasp type SFP modules into the SFP cage.
Details how to connect and configure the device using a console port and terminal emulation software.
Explains how to access and configure the device using its Web GUI interface.
Provides steps for factory default reset and the default TCP/IP settings.
Guides on interpreting LED indicators for troubleshooting issues like power or link status.
Describes methods to verify converter operation, including ping tests and web access.
Lists MIB objects, OIDs, access levels, and descriptions for management.
General| Model | FRM220-2000MS |
|---|---|
| Category | Media Converter |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z |
| Jumbo Frame Support | 9K bytes |
| Weight | 0.3 kg |
| Interface | RJ-45, SFP |
| Data Rate | 10/100/1000 Mbps |
| Operating Temperature | -10°C to 60°C |
| Humidity | 5% to 90% (non-condensing) |
| Fiber Type | Multi-mode/Single-mode |
| Connector Type | RJ-45, SFP |
| Storage Temperature | -40°C to 70°C |
| Wavelength | 850nm, 1310nm, 1550nm (depending on SFP module) |
| Transmission Distance | Up to 120km (depending on SFP module) |
To Next Page
