47
3.2.13 SNMP
SNMP or Simple Networking Management Protocol is a standard protocol for centralized management. Up to 4 management IPs can be
configured in the FMC-2000MS, their community string defined, and their access defined as read-only or read-write. A read-only manager is
only able to perform 'get' commands. All 'set' commands are reserved for a manager given read-write control.
Traps are unsolicited messages issued by this SNMP agent, that typically indicate some alarm condition has occurred. Up to 4 Trap receivers
(managers that receive the traps) are configured here and include the manager's IP address and an authentication community string.
Example of a single manager (192.168.0.114) with both RO and RW privileges, and also as a trap receiver with string 'public'.
To Next Page
Loading...
